Andrews Conversion Chain Driven Cam

Upgrade your '99-'06 Twin Cam (except '06 Dyna Glide) engine with the Andrews Conversion Chain Driven Cam. This kit allows you to convert to the newer roller-style cam chains and replace the spring tension cam chain adjusters with the more reliable, later-style hydraulic adjusters, significantly extending their lifespan. Experience performance similar to earlier bikes with the same cam grinds.

Beskrivelse

The Andrews Conversion Chain Driven Cam enables '99-'06 Twin Cam engines (excluding '06 Dyna Glide) to utilize the benefits of newer cam technology. By converting to roller-style cam chains and hydraulic adjusters, you'll achieve improved durability and reduced wear compared to the original spring tension system. Note that '99-'06 Twin Cam motors (except '06 Dyna Glide) cannot directly use '07-'17 cams because the bearing journal diameters differ (.875" vs. 1.000"). The "N" series cams solve this by retaining the .875" journal while accepting the new-style cam support plate. Enhance your engine's reliability and performance with this high-quality, American-made conversion kit. Remember to check coil bind, valve-to-valve clearance, and valve-to-piston clearance during installation. For '99-'01 models, an Andrews rear cam sprocket is required; '02-'06 models require the stock rear cam sprocket, OEM #25728-06.

Funktioner og højdepunkter

• Enables upgrade to roller-style cam chains for increased durability.
• Replaces spring tension adjusters with hydraulic adjusters for longer life.
• Designed for '99-'06 Twin Cam engines (excluding '06 Dyna Glide).
• Maintains compatibility with the new-style cam support plate on "N" series cams.
• Provides performance comparable to earlier models with similar cam grinds.
• Made in the USA with high-quality materials.

Tekniske specifikationer

• Brand: ANDREWS
• Type: Chain Conversion
• Application: Exhaust, Intake
• Grind: 26 Series
• Exhaust Open: 44°
• Exhaust Close: 4°
• Exhaust Duration: 230°
• Exhaust Lift: 0.490"
• Exhaust Lift at TDC: 0.120"
• Exhaust Lobe Centerline: 106°
• Intake Open: 11°
• Intake Close: 37°
• Intake Duration: 226°
• Intake Lift: 0.490"
• Intake Lift at TDC: 0.138"
• Intake Lobe Centerline: 102°

Vigtigt at vide

This kit requires the installation of a '07-'17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters. These parts are not included and must be purchased separately. A list of required components is supplied with each set of cams. '99-'01 model motors require Andrews rear cam sprocket. '02-'06 models must use the stock rear cam sprocket, OEM #25728-06. The installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

Gratis levering til GLS pakkebutik pakkeboks ved køb over 1.000 kr.

GLS-levering til hjemmet koster 59 DKK.

Vi gør vores bedste for at afsende din ordre så hurtigt som muligt. Alle ordrer pakkes normalt inden for 24 timer på hverdage.

Der er 14 dages returret. Læs mere

Parts Denmark er en ny webshop med base i Danmark. Vi har en fysisk adresse, som du kan besøge (endnu ingen udstillingslokale), og vi tilbyder både e-mail- og telefonisk support i vores åbningstider.

Our company info is:
Parts Denmark ApS
VAT: DK45974758
Dam Holme 11
3660 Stenløse, Denmark
hello@partsdenmark.com
+45 222 333 29

Best regards,
William Svendsen & Martin Høyer (Owners)